Creating Minnow Trap Light Pendants

On our last trip to the beach, I stopped in a hole-in-the-wall thrift shop. The store was musty, dirty and reeked of old cigarette butts. I’m still not sure why I was drawn into this store. But low and behold, this is what I found!

The owner told me it was a minnow trap. Duh, of course it is! Actually, I’m not a fisherperson, so I never would have guessed that.

What I did see was two pendant lamps for my screened porch. I have been trying to decorate it for a year, but I have been unable to find some inexpensive porch furniture. Regardless, I am aiming for a breezy ocean theme, so these would fit in perfectly!

I separated the trap into two pieces. Then cleaned them with a damp rag.

To create the light kit frame, I used these tools:

I bent a small hook in the clothes hanger with the needle-nosed pliers. Then fed the end of the coat hanger through one top edge of the minnow trap.

Using my pliers, I pinched the hook shut.

If you pretend that the first hook was attached at 12 o’ clock, then you want to attach the second hook at 3 o’clock.

Using my pliers again, I bent both wires near the center into a 90 degree “L” shape.

Next, I wove the other L hook (over and then under) the first hanger and bent the wires until they overlapped at 6 o’ clock and the second one at 9 o’ clock. I played with the wires until I was able to create a small hole in the center.

I ended up with this on both traps (now looking more like lamp shades):

I sprayed my two lamp shades with an automotive primer (I read somewhere that it has better adhesion to metal) and followed up with 2 – 3 coats of Oil Rubbed Bronze spray paint.

For the light sockets, I purchased 2 candelabra base kits from Lowe’s.

I simply inserted the socket and light bulb underneath the coat hangers. Then bent the coat hangers while making sure to get the light kit centered in the shade.

When I got everything centered, I fed the unattached ends of the coat hangers through the shade and hooked it around securing it to the wire shade.

Then all I had to do was screw in these cool iron shelf brackets into the wall on my porch and feed the wires of my lamps through and use a twisty tie to secure it.